Allwinner A13 TW A0910 V22 1126: A Powerful and Affordable SOC for Android Devices
How to Flash Allwinner A13 TW A0910 V22 1126 Firmware on Your Tablet
Allwinner A13 TW A0910 V22 1126 is a system-on-chip (SOC) that powers many Android tablets. It has a quad-core ARM Cortex-A17 processor, a Mali G31 MP2 GPU, a 4G LTE modem, a 4K/2K video encoder/decoder, an image signal processor, an audio core, 3D graphics, and a system controller. It also supports Android 4.4.2 and has a basic USB 2.0 port, a 10/100 Ethernet port, a composite video port, a HDMI 2.0 port, and a 3.5mm audio jack.
allwinner a13 tw a0910 v22 1126
If you have a tablet that uses this SOC and you want to flash it with a new firmware, you need to follow some steps carefully. Flashing a firmware means installing a new operating system on your tablet, which can improve its performance, fix bugs, or add new features. However, flashing a firmware also involves some risks, such as bricking your tablet or losing your data. Therefore, you need to be cautious and backup your data before flashing.
In this article, we will show you how to flash Allwinner A13 TW A0910 V22 1126 firmware on your tablet using a Windows PC and a USB cable. You will also need to download the firmware file and some tools that will help you flash the firmware. Here are the steps you need to follow:
Step 1: Download the Firmware File and Tools
The first thing you need to do is to download the firmware file and the tools that will help you flash the firmware. The firmware file is a zip file that contains the operating system and other files that will be installed on your tablet. The tools are software programs that will help you connect your tablet to your PC and flash the firmware.
You can download the firmware file and the tools from this link: A13-TW-A0910-V22-1126-gsl3688.zip. This is the same link that was shown in this YouTube video: Tw a0910 v22 1126 Allwinner A13 Firmware. The zip file is about 300 MB in size and contains the following files:
A13-TW-A0910-V22-1126-gsl3688.img: This is the firmware image file that will be flashed on your tablet.
LivesuitPack_v1.11.zip: This is a zip file that contains Livesuit, a tool that will help you flash the firmware.
PhoenixUSBPro.zip: This is another zip file that contains PhoenixUSBPro, another tool that will help you flash the firmware.
USB Driver.zip: This is a zip file that contains the USB driver that will help you connect your tablet to your PC.
After downloading the zip file, you need to extract it to a folder on your PC. You can use any unzip program such as WinRAR or 7-Zip to extract the zip file. You should see four files in the folder after extracting.
Step 2: Install the USB Driver
The next thing you need to do is to install the USB driver that will help you connect your tablet to your PC. The USB driver is a software program that allows your PC to recognize and communicate with your tablet. Without the USB driver, your PC will not be able to detect your tablet when you connect it with a USB cable.
To install the USB driver, you need to follow these steps:
Open the folder where you extracted the zip file and double-click on the USB Driver.zip file.
Extract the contents of the USB Driver.zip file to another folder on your PC.
Open the folder where you extracted the USB Driver.zip file and double-click on the InstallDriver.exe file.
A window will pop up asking you if you want to install the driver. Click on Yes.
Step 3: Choose the Flashing Tool
The next thing you need to do is to choose the flashing tool that will help you flash the firmware. The flashing tool is a software program that will transfer the firmware image file from your PC to your tablet and install it on your tablet. There are two flashing tools that you can use: Livesuit or PhoenixUSBPro. You can choose either one of them, but we recommend you to use Livesuit as it is easier and more reliable.
To choose the flashing tool, you need to follow these steps:
Open the folder where you extracted the zip file and double-click on the LivesuitPack_v1.11.zip file or the PhoenixUSBPro.zip file, depending on which tool you want to use.
Extract the contents of the zip file to another folder on your PC.
Open the folder where you extracted the zip file and double-click on the Livesuit.exe file or the PhoenixUSBPro.exe file, depending on which tool you want to use.
A window will pop up asking you if you want to run the tool. Click on Run.
The flashing tool will open and you will see its main interface.
Step 4: Connect Your Tablet to Your PC
The next thing you need to do is to connect your tablet to your PC using a USB cable. You need to make sure that your tablet is turned off before connecting it to your PC. You also need to make sure that your tablet has enough battery power before flashing the firmware. It is recommended that your tablet has at least 50% battery power before flashing.
To connect your tablet to your PC, you need to follow these steps:
Turn off your tablet by holding the power button for a few seconds and selecting Power off.
Connect one end of the USB cable to your tablet and the other end to your PC.
Press and hold the volume down button on your tablet and then press and hold the power button for a few seconds.
Release both buttons when you see a green Android logo on your tablet screen.
Your tablet will enter into flash mode and your PC will detect it.